咨询热线

18665386886

当前位置:首页   >  产品中心  >  泰克探头产品  >  差分探头  >  泰克TDP0500差分探头

泰克TDP0500差分探头

简要描述:● 泰克TDP0500差分探头拥有500 MHz的探头带宽,小于1pF的电容差分输入,1 MΩ的微分输入电阻。TDP0500差分探头可应用于高速开关电源设计。制造工程试验中也可以应用TDP0500差分探头。

  • 产品型号:
  • 厂商性质:代理商
  • 更新时间:2024-01-28
  • 访  问  量:1244

详细介绍

Introduction

Features & Benefits
Outstanding Electrical Performance
  • 1 GHz and 500 MHz Probe Bandwidth
  • <1 pF Differential Input Capacitance
  • 1 MΩ Differential Input Resistance
  • ±42 V (DC + pk AC) Differential Input Voltage
  • > 18 dB CMRR (at 250 MHz 50X Attenuation)
  • Selectable Bandwidth Limiting Filters
  • DC Reject
Versatile DUT Connectivity
  • Small Compact Probe Head for Probing Small Geometry Circuit Elements
  • Straight Pin, Square Pin, Solder Down, Variable Pitch Standard Accessories
  • Robust Design for Reliability
Ease-of-Use
  • Provides Automatic Units Scaling and Readout on the Oscilloscope Display
  • TDP1000, TDP0500
  • Connect Directly to the DPO7000, DPO4000, and MSO4000 Series Oscilloscopes Using TekVPI? Probe Interface (No additional Power Adapters Required)
  • Easy Access to Scope-Displayed Probe Menu for Probe Setup Control and Operating Status Information
  • AutoZero – Zeros Out Output Offset
  • P6251, P6250
  • Connect directly to TDS5000 and other TekProbe? interface oscilloscopes, or to TekConnect oscilloscopes using TCA-BNC adapter
Applications
  • High-speed Switch Mode Power Supply Design
  • CAN/LIN Bus Design
  • High-Speed Digital Design
  • Digital Design and Characterization
  • Manufacturing Engineering Test
  • Research and Development

   The TDP1000, TDP0500, P6251, and P6250 High Voltage Differential Probes provide excellent high-speed electrical and mechanical performance required for today's Switch Mode Power Supply (SMPS), CAN/LIN Bus, and high-speed digital system designs.
   Specifically designed for use with and direct connection to Tektronix oscilloscopes with either the TekVPI? probe interface, or TekProbe BNC Interface. The TDP1000, TDP0500, P6251, and P6250 High Voltage Differential Probes achieve high-speed signal acquisition and measurement fidelity by solving three traditional measurement challenges:

  • Outstanding Electrical Performance
  • Versatile Device Under Test Connectivity
  • Ease-of-Use

Characteristics/Specs

Characteristics

 Description

Bandwidth(Probe Only)

1 GHz(TDP1000, P6251),
500 MHz(TDP0500, P6250)

Attenuation

5X,50X

Rise Time(Probe Only)

≤350ps(TDP1000,P6251),
<700ps(TDP0500,P6250)

Differential Input Capacitance

<1pF

Differential Input Resistance

1MΩ

CMRR

>55 dB at 30 kHz;

>50 dB at 1 MHz;

>18 dB at 250 MHz (warranted at 50X attenuation)

Sensitivity/Noise Level

2 mV RMS (5X attenuation);

1 mV RMS (50X attenuation) referred to the probe output

10 mV RMS (5X attenuation);

50 mV RMS (50X attenuation) referred to the probe input

Differential Mode Input Voltage

±42V (DC + pk AC);30 VRMS

Common Mode Input Voltage

±35V (DC + pk AC);25 VRMS

Input Offset Range

 

TDP1000, TDP0500

±42V(5X or 50X attenuation)

P6251, P6250

±4.25V(5X attenuation);
±42V(50X attenuation)

Max Input Voltage(Non-destruct)

±100V(DC+pkAC)

Selectable Bandwidth Filter Limits

 

TDP1000, TDP0500

100Hz,10kHz,1MHz,Full

P6251, P6250

5MHz,Full

DC Reject

0.4Hz(5X);4Hz(50X)

Gain Accuracy at DC

±2%

Propagation Delay

6.5ns

Scope Interface

 

TDP1000, TDP0500

TekVPI Probe Interface

P6251, P6250

TekProbe BNC Level II Interface

Physical Characteristics

 TDP1000,
TDP0500
P6251,
P6250
  
Dimensionslbs/inkg/cmlbs/inkg/cm

Weight

0.320 lbs

0.146 kg

0.360 lbs

0.163kg

Compensation Box Dimensions

    

Height

1.6 inches

4.1 cm

1.0 inches

2.6cm

Width

1.2 inches

3.05 cm

1.6 inches

4.1cm

Length4.2 inches10.7 cm3.2 inches8.13cm

Cable Length

47.2 inches, 1.2 meter

 

 

 

Power Requirements

TDP1000,TDP0500

Are powered directly by the DPO7000, DPO4000, and MSO4000 Series oscilloscopes using the TekVPI interface

P6251,P6250

Are powered directly by the TekProbe-BNC interface, eliminating the need for additional power supplies and cables when used with TekProbe-BNC oscilloscopes.
May also be powered through the 1103 TEKPROBE Power Supply for use with non-TekProbe interface instrumentation.

Standard Warranty - 1 year parts and labor
Recommended Oscilloscopes

ProbesOscilloscopesInterfaceAdapter
Required

TDP1000,TDP0500

DPO7000,DPO4000,and MSO4000 Series

TekVPI probe

P6251,P6250

TDS5000 Series, TDS500, TDS600 and TDS700 Series, and other Tektronix oscilloscopes with TekProbe BNC-Level2 interface.

TekProbe BNC-Level2

DPO70000,DSA70000,TDS6000 and TDS7000 oscilloscopes

TekConnect

TCA-BNC

Required Oscilloscope Firmware

Probe

OscilloscopesFirmware
TDP1000,TDP0500

DPO7000 Series

Version 3.0.2 or later.

DPO4000/MSO4000 Series

Version 2.06 or later.

P6251,
P6250

TekProbe-BNC Level II Oscilloscopes and adapter(TCA-BNC)

TekProbe-BNC interface is firmware-independent

产品咨询

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7

联系我们

深圳市金厚德电子科技有限公司 公司地址:深圳市龙岗区黄阁路天汇大厦506   技术支持:化工仪器网
  • 联系人:金先生
  • QQ:1718888981
  • 公司传真:0755-82501852
  • 邮箱:dong.jin@szkinghood.com

扫一扫 更多精彩

微信二维码

网站二维码